SCRAP DAMASCUS High Carbon Raw Steel 1lb Random Assortment/Various Pattern For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SCRAP DAMASCUS High Carbon Raw Steel 1lb Random Assortment/Various Pattern:
$3.50

Two Finger Knife, LLC

The World Leader in Finished Damascus Knife Blades

We are a USA based company and all of our blades are handmade/ground in the USA

Damascus scrap from various patterns to various shapes and thicknesses.

A single order is equal to one pound of scrap,

but the pieces will be different from what this photo shows.

You will be given a random assortment of steel.

Note- You may not see the damascus pattern in the steel until it is etched with acid.

See below for reforging, heat treating, and etching instructions.

200+/- Layers of steel

***PLEASE ALLOW US TO COMBINE THE SHIPPING FOR MULTI-ITEM ORDERS BEFORE YOU PAY! THANKS!***

Congratulations! You are now shopping with Two Finger Knife, Llc the world leader for finished damascus steel knife blades.

We forge all of our own damascus steel right here in the USA from1095 and 15N20. No off shore tin can lid, mild steel junk blades come from our shops.

INSTRUCTIONS ON PROCESSING TFK DAMASCUS SCRAP

The Damascus scrap you have just purchased is a mixture of twist, random, snake eye, ladder patterns etc. Depending on the mix of the scrap you received, you may be able to use it as is or you may need to re-forge it into other shapes or thickness at a cherry red heat of (1500 degrees). After shaping, grinding and buffing to a 400 grit surface finish, you may want to harden the part by quenching it at 1500 degrees in a light oil to harden it and make the patterns in the steel more contrasting and distinct after etching. After hardening, buff to 400 grit, clean with acetone, and etch in a solution of 20% ferric chloride to 80% distilled water, until the desired surface effect is achieved. Clean in baking soda and water with 4000 grit steel wool and then with 2000 grit wet dry sand paper. Dry the part, and oil with WD40.

We make knife blades, sword blades, tomahawks, throwing knives, throwing stars, arrowheads, surface ground bar stock, custom blades for knife makers around the world, blades and bar stock for some of the largest cutlery companies in the world. We also make blades in high-carbon alloy steel,1095, and 52100 bearing steel.

We list more finished damascus steel blades on than any other company. As the world leader we focus on Quality and Quantity.

Shop with the World Leader! Two Finger Knife, LLC in Idaho Falls Idaho.

-Please feel free to contact us with questions, comments or suggestions! We strive for 5 stars on all transactions!

4570 N. Haroldsen Dr.

Idaho Falls, ID 83401

208 523 7436

Thank You for shopping with Two Finger Knife, LLC

SCRAP DAMASCUS High Carbon Raw Steel 1lb Random Assortment/Various Pattern

$3.50