Waste oil Forge and foundry Casting burner air pre heat 2,650 F BABY GODZILA for Sale

Waste oil Forge and foundry Casting burner air pre heat 2,650 F BABY GODZILA For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Waste oil Forge and foundry Casting burner air pre heat 2,650 F BABY GODZILA:
$195.00

Burns any fuel or any oil including propane , stop spending hundreds on propane or worrying about losing pressure in your tanks.Melt cast Iron in just 8 minutes
Made for smelting cast iron and other hard to melt metals extremely fast , melts cast iron in with ease and glass .foundry temps of 2,800 deg Cast iron in just 8 minutes from cold start .and cast iron are not the same, we have melted cast iron in seconds after preheating forge for 1/2 hour .Device also lays flat if needed. Stainless steel 304 Industrial grade Waste oil burner. Burns all fuels even gases like propane and natural gas at high performance levels .Able to run a high velocity flame >2400 thermal couple temp, a open propane flame from a good torch is only 1900 to 2000 deg .Extremely adjustable flame for lean and rich combustion processes .Device is easy to clean when waste oil is used as the fuel source.Device self cleans at high temps or lean burn flames .This model has a air line pre heater that heats the air and the fuel to over 300 deg F allowing Glass melting and other high temp foundry or kiln operations . Also comes in horizontal design .Many people have purchased waste oil nozzles on line only to discover they dont work as advertised . I have bin designing and testing waste oil burners and exotic Combustion system for industrial processes for 10 years and you will be impressed with the different these nozzles can make to your industrial process.
My clients often tell me stories of having purchased china brand siphon nozzles only to discover they have bin deceived with both specifications and functionality. They also come to me after having bought a $1000 diesel/ waste oil burner that wont burn waste oil and puts out 1/4 of the rated power .
OutputDiesel >100 kwwaste oil > 50kw , depends on viscosity or fuel tank position .
Fuel consumption
1 to 10 LPH
Air2 to 10 SCFM @ 25 to 75 PSI
Uses siphon nozzle , no oil or fuel pump required .see this device in action here . >>> See device in action