PAIR OF VINTAGE PREWAR BICYCLE FRONT HUB BEARINGS COLSON IVER JOHNSON UNION BIKE for Sale

PAIR OF VINTAGE PREWAR BICYCLE FRONT HUB BEARINGS COLSON IVER JOHNSON UNION BIKE For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

PAIR OF VINTAGE PREWAR BICYCLE FRONT HUB BEARINGS COLSON IVER JOHNSON UNION BIKE:
$5.91

HUB BEARING 3/16X7.

- Use: Front Hub
- These bearings are specifically designed for use in the front hub of a bicycle. Front hubs typically have different specifications compared to rear hubs.
- Fit Axle: 5/16
- This indicates the size of the axle that these bearings are designed to fit. The bearings are suitable for a front hub with a 5/16 inch diameter axle.
- Size: 3/16 X 7
- This refers to the size of the bearing. The diameter of the bearing balls is 3/16 of an inch.
- Ball Qty (Quantity): 7
- Indicates the number of bearing balls contained within the bearing. In this case, there are seven 3/16-inch diameter balls in the bearing.
- Measurement and Identification:Measure the diameter, width, and other relevant dimensions of your existing bearings. This information will be crucial when searching for replacements. Bearings are often standardized, but accuracy in measurements is essential.
- Size and Compatibility: Vintage bicycles often had specific sizes for hub bearings. It's essential to know the exact size and specifications of the bearings you need for your particular hub model.
- Material and Construction: Vintage bicycles typically used steel bearings. Check whether your original bearings were made of steel and try to find replacements with similar material. Ensure that the construction and quality match the standards of the prewar era.
One of the common ball bearing retainer size usually for front hub with 5/16 axle. Please verify the size you required before purchasing.
Made of high-quality carbon steel material.
Lubricated for corrosion resistance and long service life. Please still put some lubricant during installation to maximize its service life
These bearing cage could also replace loose bearings