Superconductor Inlays / Titanium Body /Stainless Steel Plate Fidget Slider EDC for Sale

Superconductor Inlays / Titanium Body /Stainless Steel Plate Fidget Slider EDC For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Superconductor Inlays / Titanium Body /Stainless Steel Plate Fidget Slider EDC:
$600.00

This item is a Dupe or Duplication. Understand what this is and what it means. There are no brandings or marking visible.

Body: media blasted finish titanium.

Inlays: superconductor with a light reverse etched finish.

Plates: stainless steel curved for great action.

Scratches and wear on the inner plate sides from use is normal and to be expected over time and use. One side of the inner plates is taped to reduce wear over time (could be removed by buyer choice).

Due to the normal operation of the slider and metal on metal contact there will be more scratches on the inner sides and over time, this is normal due to the function of the slider. Please accept this and view all photos. Returns are not accepted.

Periodic care and maintenance of the slider is expected and the responsibility of the buyer. The inner sides may need cleaned, polished, or used/worn in more if it starts sticking or acting sluggish. Please note this and that returns are not accepted.

Great care must be take of the plates are removed, it is best to unscrew the single screw and then while still holding the half together stick it to something magnetic and only then lift up on the outer shell. The screws must not be tightened too much or the material may crack or the threaded part may strip.

Sticking it to something magnetic first keeps the magnets from loosely coming together which can and will shatter them. Note that this must be done and no replacement of magnets can be provided due to user error or not following this advice. Magnets are loosely held in between the separated inserts, this creates a “crispy” sound when slid and can be found enjoyable or annoying to some, take note.

The two halves slide and pull into place by use of strong small magnets. You then slide it back and forth to fidget. Hours of enjoyment and relaxation to be had for sure. Note the sounds of sliding this haptic device may be annoying to those around you. No returns as you have been warned :)

Different displays may show colors differently. Anodized Pattern is random. Ask for more photos prior to purchase. No returns. Photos taken under different lights to show the variance picked up by the camera.

Item function has been checked and it functions well and as intended. Any issues with function after buyer use, disassembly, or damages are not covered and neither are manufacturers warranty. Item sold as is. Returns are not accepted. All sales final. No exceptions.

Not a toy for children, contains small parts and/or choking hazard. Magnets can be dangerous or fatal if swallowed! Seller is not responsible for improper use or any damages or injury caused by the parts of this item or the magnets. Proper precautions, safety, storage, and use is your responsibility. Magnets may damage electronics, see magnet internet safety guides before use. By purchasing this item you are agreeing to these terms.