NEW HX711 24 Bit Dual Channel Precision Sensor Module 100g Weight Sensor Module For Sale

NEW HX711 24 Bit Dual Channel Precision Sensor Module 100g Weight Sensor Module


This item has been shown 39 times.

Buy Now

NEW HX711 24 Bit Dual Channel Precision Sensor Module 100g Weight Sensor Module:
$5

NEW HX711 24 Bit Dual Channel Precision Sensor Module 100g Weight Sensor ModuleHX711 Weighing Sensors Module

This module uses 24 high-precision A / D converter chip hx711, is designed for high-precision electronic scale and design, with two analog channel input, the internal integration of a gain programmable amplifier 128. Input circuit can be configured to provide an electrical bridge bridge voltage (such as pressure, weight) sensor model is an ideal high-precision, low-cost sampling front-end module• Two selectable differential input channels
• On-chip active low noise PGA with selectable gain of 32, 64 and 128
• On-chip power supply regulator for load-cell and ADC analog power supply
• On-chip oscillator requiring no external component with optional external crystal
• On-chip power-on-reset
• Simple digital control and serial interface: pin-driven controls, no programming needed
• Selectable 10SPS or 80SPS output data rate
• Simultaneous 50 and 60Hz supply rejection
• Current consumption including on-chip analog power supply regulator: normal operation < 1.5mA, power down < 1uA
• Operation supply voltage range: 2.6 ~ 5.5V
• Operation temperature range: -40 ~ +85℃

• 16 pin SOP-16 package 100g weight sensor module

Description:

  • 0-100g range silver tone aluminum wired weighing load cell, high accuracy, simple structure, easy installation.
  • Widely used for electronic scales and balance, material scales, jewelry scalesand control system.

Specifications:

Product Name Weighing Load Cell Rated Load 100g/0.22Lb Ranted Output 1.0 +/-10 %mV/V Non-Linearity 0.02%F.S. Hysteresis 0.02%F.S. Repeatability 0.02%F.S. Zero Balance +/-2%F.S. Temp Effect on Zero 0.025%F.S./10C Temp Effect on Zero Output 0.025%F.S./10C Creep (30min) 0.03%F.S. Input Impedance 1130+/-10 Ohm:1090+/-10 Ohm Output Impedance 1000+/-10 Ohm Insulation > 2000 Megohm / 50V DC Compensated Temperature Range -10C~40C Operating Temperature Range -20C~60C Safe Overload 150%F.S. Ultimate Overload 300%F.S. Input End Red+, Black- Output End Blue+, White- Recommended Excitation 10V Maximum Excitation 15V Load Cell Size 47 x 12 x 6mm / 1.9" x 0.47" x 0.24" (L*W*T) Thead Hole Diameter 3mm /0.12" Hole Center Distance 40 x 6 mm / 1.6" x 0.24" (L*Max.W) Cable Length 8cm / 3.1" Main Color Silver Tone Material Aluminum Alloy Weight 15g Package included: 1PCS * HX711 Weighing Sensor Dual-Channel 24 Bit Precision AD Pressure Module 1PCS*100g Weight Sensor Module


Buy Now

Dht11 Digital Module Humidity Temperature-sensor-free-cable Arduino Raspbe Xqm picture
Dht11 Digital Module Humidity Temperature-sensor-free-cable Arduino Raspbe Xqm


Keyestudio Turbidity Liquid Water Testing Sensor V1.0 Compatible Arduino picture
Keyestudio Turbidity Liquid Water Testing Sensor V1.0 Compatible Arduino


16-channel 12-bit Pwm/servo Driver I2c Interface Pca9685 For Diy Module Hot picture
16-channel 12-bit Pwm/servo Driver I2c Interface Pca9685 For Diy Module Hot


Powered by WordPress. Designed by WooThemes