New AMD AM29F016B-120EC NOR Flash Parallel 5V 16M-bit 2M x 8 120ns 48-Pin TSOP For Sale
This item has been shown 16 times.
New AMD AM29F016B-120EC NOR Flash Parallel 5V 16M-bit 2M x 8 120ns 48-Pin TSOP:
New AMD AM29F016B-120EC NOR Flash Parallel 5V 16M-bit 2M x 8 120ns 48-Pin TSOP. Parts are factory new surplus from a project and have never been used. sale is for 1 piece, 26 available. Parts will be shipped in secure, antistatic packaging. Any questions, please ask!
16 Megabit (2 M x 8-Bit) CMOS 5.0 Volt-only, Uniform Sector Flash Memory
DISTINCTIVE CHARACTERISTICS■ 5.0 V ± 10%, single power supply operation — Minimizes system level power requirements■ Manufactured on 0.32 µm process technology — Compatible with 0.5 µm Am29F016 device■ High performance — Access times as fast as 70 ns■ Low power consumption — 25 mA typical active read current — 30 mA typical program/erase current — 1 µA typical standby current (standard access time to active mode)■ Flexible sector architecture — 32 uniform sectors of 64 Kbytes each — Any combination of sectors can be erased — Supports full chip erase — Group sector protection: A hardware method of locking sector groups to prevent any program or erase operations within that sector group. Temporary Sector Group Unprotect allows code changes in previously locked sectors■ Embedded Algorithms — Embedded Erase algorithm automatically preprograms and erases the entire chip or any combination of designated sectors — Embedded Program algorithm automatically writes and verifies bytes at specified addresses■ Minimum 1,000,000 program/erase cycles per sector guaranteed■ 20-year data retention at 125°C — Reliable operation for the life of the system■ Package options — 48-pin and 40-pin TSOP — 44-pin SO — Known Good Die (KGD) (see publication number 21551)■ Compatible with JEDEC standards — Pinout and software compatible with single-power-supply Flash standard — Superior inadvertent write protection■ Data# Polling and toggle bits — Provides a software method of detecting program or erase cycle completion■ Ready/Busy# output (RY/BY#) — Provides a hardware method for detecting program or erase cycle completion■ Erase Suspend/Erase Resume — Suspends a sector erase operation to read data from, or program data to, a non-erasing sector, then resumes the erase operation■ Hardware reset pin (RESET#) — Resets internal state machine to the read mode