Battery Lipo Tamiya Connector 2000MAH 11.1V 3S 15-25C Turnigy Nano-Tech Softail For Sale



Buy Now

Battery Lipo Tamiya Connector 2000MAH 11.1V 3S 15-25C Turnigy Nano-Tech Softail:
$43.59

Battery Lipo Tamiya Connector 2000MAH 11.1V 3S 15-25C Turnigy Nano-Tech SoftailThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Capacity: 2000mAhVoltage: 3S1P / 3S cell / 11.1VDischarge: 15C Constant / 25C BurstWeight: 155g (including cable, plug & case)Dimensions: 126x21x29mmBalance Plug: JST-XHExhaust Plug: Mini-Tamiya (Mini Molex)Advantages compared to traditional LiPoly batteries;• Power density reaches 7.5 kW / kg.• Less voltage sag during high rate discharge, giving more power under load.• internal impedance can reach as low as 1.2mO compared to that of 3MO of a standard Lipoly.• Plus thermal control, package usually does not exceed 60degC• swelling during heavy load does not exceed 5%, compared to 15% of a normal Lipoly.• Greater capacity during heavy discharge. More than 90% at the rate of 100% C.• Quick charge capable, up to 15C on some batteries.• Greater Life Cycle, almost double that of standard LiPoly technology.Nano-core technology in lithium-ion batteries is the application of conductive additive nanometers. The nanometer conductive additives form ultra-strong conducting electron networks in the electrodes which can increase electronic conductivity.These additives create the possibility for imbibition in the liquid vehicle to provide more ion channels.This improves the ion transmission and diffusion capability of ions. Through improving conductivity and electronic transmission ions, the impedance is reduced and the high discharge bias rate decreases greatly.Capacity: 2000mAh Voltage: 3S1P / 3S cell / 11.1V Discharge: 15C Constant / 25C Burst Weight: 155g (including cable, plug & case) Dimensions: 126x21x29mm Balance Plug: JST-XH Exhaust Plug: Mini-Tamiya (Mini Molex) Advantages compared to traditional LiPoly batteries; • Power density reaches 7.5 kW / kg. • Less voltage sag during high rate discharge, giving more power under load. • internal impedance can reach as low as 1.2mO compared to that of 3MO of a standard Lipoly. • Plus thermal control, package usually does not exceed 60degC • swelling during heavy load does not exceed 5%, compared to 15% of a normal Lipoly. • Greater capacity during heavy discharge. More than 90% at the rate of 100% C. • Quick charge capable, up to 15C on some batteries. • Greater Life Cycle, almost double that of s


Buy Now

Powered by WordPress. Designed by WooThemes