50W 0.47 Ohm Aluminium Housing Chassis Mount Wirewound Power Resistor Green 2pcs For Sale

50W 0.47 Ohm Aluminium Housing Chassis Mount Wirewound Power Resistor Green 2pcs


Buy Now

50W 0.47 Ohm Aluminium Housing Chassis Mount Wirewound Power Resistor Green 2pcs:
$9.69

Document50 Watt and 0.47 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.This 50W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.Board length 1.96 inches(49.8mm) with two 3.5mm mounting hole, and 2 terminals for a connection.Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.50 Watt 0.47 Ohm Aluminum Case Resistor with 5% TolerancePower: 50WResistance: 0.47 ohmTolerance: 5%Connection Type: RodsBoard Length: 49.8mmMounting Hole Diameter: 3.5mmDistance Between Mounting Hole: 41mmMaterials: Nickel Alloys Wire Wound Resistor with Aluminum CaseColor: GreenPackage Content: 2 pcs 50W 0.47 ohm Aluminum ResistorSuggestion:a. The load resistor will get huge hot, please don\'t touch it when the resistor is working.Because alumnium resistor is a braking device which transfers Electric energy to Thermal energy.This is a normal physical phenomenon. b. The load resistor should be mounted on metal board, not on flammable board such as plastic board,rubber,paper,wood and etc. c. We recommend a 30%-50% increase in rated power based on your actual load power and add a heat sink device when it is necessary. If you choose a 30% increase in rated power, you must add a heat sink device.If you choose a 50% increase in rated power, you can add a heat sink device for the best use of its performance. d. Not recommend to use it for Automotive repair or refit unless you have professional knowledge.
  • 100pcs 2W 2 Watt Metal Oxide Film Resistor Axial Lead 100 Ohm ±5% Tolerance USD 11.78
  • 50W 33k Ohm Aluminium Housing Chassis Mount Wirewound Power Resistor Green 2pcs USD 9.84
  • 25W 25 Ohm 5% Aluminum Housing Resistor Wirewound Resistor Green Tone 3 Pcs USD 11.37
  • 25 Watt 1 Ohm 5% Aluminum Housing Resistor Wirewound Resistor Gold Tone 5Pcs USD 14.2
  • 300W 50 Ohm 5% Fixed Type Ceramic Tubular Wire Wound Resistor USD 42.76
  • 5 Watt 5W 1000 Ohm 5% Metal Oxide Film Resistors 50 Pcs USD 18.88
    50W 0.47 Ohm Aluminium Housing Chassis Mount Wirewound Power Resistor Green 2pcs

    • 50 Watt and 0.47 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
    • Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
    • This 50W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
    • Board length 1.96 inches(49.8mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
    • Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
    • 50 Watt 0.47 Ohm Aluminum Case Resistor with 5% Tolerance

      Power: 50W

      Resistance: 0.47 ohm

      Tolerance: 5%

      Connection Type: Rods

      Board Length: 49.8mm

      Mounting Hole Diameter: 3.5mm

      Distance Between Mounting Hole: 41mm

      Materials: Nickel Alloys Wire Wound Resistor with Aluminum Case

      Color: Green

      Package Content: 2 pcs 50W 0.47 ohm Aluminum Resistor

      Suggestion:

      a. The load resistor will get huge hot, please don\'t touch it when the resistor is working.Because alumnium resistor is a braking device which transfers Electric energy to Thermal energy.This is a normal physical phenomenon.

      b. The load resistor should be mounted on metal board, not on flammable board such as plastic board,rubber,paper,wood and etc.

      c. We recommend a 30%-50% increase in rated power based on your actual load power and add a heat sink device when it is necessary.
      • If you choose a 30% increase in rated power, you must add a heat sink device.
      • If you choose a 50% increase in rated power, you can add a heat sink device for the best use of its performance.

      d. Not recommend to use it for Automotive repair or refit unless you have professional knowledge.

      Hot Item
      • 1000 Pcs Axial Lead Carbon Film Resistors 330 Ohm 5% Tolerance 1/4WUSD 12.81
      • 25W 15 Ohm Aluminium Housing Chassis Mount Wirewound Power Resistors Gold 2pcsUSD 9.25
      • 100 Pcs 1W 1 Watt Metal Oxide Film Resistor Axial Lead 82 Ohm ±5% ToleranceUSD 7.35
      • 10pcs 5W 700V 5 Watt 100 ohm Metal Oxide Film ResistorUSD 7.54
      • Wirewound Ceramic Potentiometer Adjustable Rheostat Resistor 25W 20Ohm w KnobUSD 16.93
      Payment
      • We ONLY accept Paypal.
      • Please do not email us to ask for other payment option.
      • We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
      Shipping
      • For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
      • Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
      Return Policy
      • If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
      About Us
      • We are continually expanding our product selection to better serve your need.
      • We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
      • If you need any help or have any suggestions, please don\'t hesititate to contact us anytime , we will reply you within 24 hours and try the best to help 0.47 Ohm Aluminium Housing Chassis Mount Wirewound Power Resistor Green 2pcs

        • 50 Watt and 0.47 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
        • Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
        • This 50W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
        • Board length 1.96 inches(49.8mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
        • Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
        • 50 Watt 0.47 Ohm Aluminum Case Resistor with 5% Tolerance

          Power: 50W

          Resistance: 0.47 ohm

          Tolerance: 5%

          Connection Type: Rods

          Board Length: 49.8mm

          Mounting Hole Diameter: 3.5mm

          Distance Between Mounting Hole: 41mm

          Materials: Nickel Alloys Wire Wound Resistor with Aluminum Case

          Color: Green

          Package Content: 2 pcs 50W 0.47 ohm Aluminum Resistor

          Suggestion:

          a. The load resistor will get huge hot, please don\'t touch it when the resistor is working.Because alumnium resistor is a braking device which transfers Electric energy to Thermal energy.This is a normal physical phenomenon.

          b. The load resistor should be mounted on metal board, not on flammable board such as plastic board,rubber,paper,wood and etc.

          c. We recommend a 30%-50% increase in rated power based on your actual load power and add a heat sink device when it is necessary.
          • If you choose a 30% increase in rated power, you must add a heat sink device.
          • If you choose a 50% increase in rated power, you can add a heat sink device for the best use of its performance.

          d. Not recommend to use it for Automotive repair or refit unless you have professional knowledge.

          • 100pcs 2W 2 Watt Metal Oxide Film Resistor Axial Lead 100 Ohm ±5% Tolerance USD 11.78
          • 50W 33k Ohm Aluminium Housing Chassis Mount Wirewound Power Resistor Green 2pcs USD 9.84
          • 25W 25 Ohm 5% Aluminum Housing Resistor Wirewound Resistor Green Tone 3 Pcs USD 11.37
          • 25 Watt 1 Ohm 5% Aluminum Housing Resistor Wirewound Resistor Gold Tone 5Pcs USD 14.2
          • 300W 50 Ohm 5% Fixed Type Ceramic Tubular Wire Wound Resistor USD 42.76
          • 5 Watt 5W 1000 Ohm 5% Metal Oxide Film Resistors 50 Pcs USD 18.88
          Hot Item
          • 1000 Pcs Axial Lead Carbon Film Resistors 330 Ohm 5% Tolerance 1/4WUSD 12.81
          • 25W 15 Ohm Aluminium Housing Chassis Mount Wirewound Power Resistors Gold 2pcsUSD 9.25
          • 100 Pcs 1W 1 Watt Metal Oxide Film Resistor Axial Lead 82 Ohm ±5% ToleranceUSD 7.35
          • 10pcs 5W 700V 5 Watt 100 ohm Metal Oxide Film ResistorUSD 7.54
          • Wirewound Ceramic Potentiometer Adjustable Rheostat Resistor 25W 20Ohm w KnobUSD 16.93
          Payment
          • We ONLY accept Paypal.
          • Please do not email us to ask for other payment option.
          • We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
          Shipping
          • Usually we ship your order out within 24 hours in business day.
          • For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
          • Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
          Return Policy
          • Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
          • If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
          About Us
          • We are continually expanding our product selection to better serve your need.
          • We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
          • If you need any help or have any suggestions, please don\'t hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.

          On Jan-10-22 at 15:43:05 PST, seller added the following information:



          Buy Now

          Related Items:

    Powered by WordPress. Designed by WooThemes