This stage of the analysis illustrates the variable timing function of the adjustable Cam and Standing Lever. The Planet Sprocket with its attached Pendulum, the Chassis and the Sun Sprocket are all free to rotate in the following schematic diagrams.

The diagram below shows the Cam that's located directly behind the Sun Sprocket, it's fixed to the Chassis and rotates with it. The Standing Lever (visible in the videos as a second lever moving back and forth in front of the Control Lever) and the corresponding position of the Cam that's moving it are depicted to the left, presented here as an animation. By linking the Standing Lever to the Control Lever the mechanism's position can be synchronized with the position of the Control Lever at all points around 360 degrees....