how about a link to a site to show what it looks like. that will shut down a lot of detractors if it is real.
it is so simple to tell exactly how it works and how it can be built that it would completely take away any profit that I could make from it.
to give you a link to it is to give it to you free of charge.
unlike the cfpfm which by the way was requested by georgia tech the leading mechanical engineering school in america as a summer project but denied funding by the C.E.C.
( california energy commision ) energy funding programs within the U.S.
not to mention the D.O.E. we all know who they are.
the cfpfm is also a working device however it is expensive to build and hard to understand it seems.
the device in question is too simple to just tell you how or show you how it works.
if you are really interested in it then buy one or just buy the instruction to build one yourself.
money back guarantee of course if you fudge the construction then I could not be held responcible.
the parts to construct the device can be had at your local hardware store.
and should cost less than $10.00
if made from pine wood.
of course this would be instructions only.
you would not be purchaseing a pre made kit.
you would not have permission to duplicate and/or sale any similar type of device.
