10000W Wind Turbine Generator Kit 3 Blades DC-12V With Power Charge Controller©™ For Sale

10000W Wind Turbine Generator Kit 3 Blades DC-12V With Power Charge Controller©™


Buy Now

10000W Wind Turbine Generator Kit 3 Blades DC-12V With Power Charge Controller©™:
$175.92

  • HOME
  • DETAIL
  • SHIPPING
  • ABOUT US
  • CONTACT US
Store Categories
    {Category}
Recommended 12000W 5 Blades Wind Turbines Generator Horizontal 24V Energy Turbines Charge☑98.21USDKids Motorcycle Kids Ride On Motorcycle 6V Battery Powered Toy Headlights&Music☑45.85USD4-STROKE 49CC GAS POWER POCKET BIKE Mini-MOTORCYCLE for Kids and Teens☑☑274.78USD12000W DC 5 Blades Gourd Wind Turbine Generator Vertical Axis Wind Power 24V US√138.14USD Detail
10000W Wind Turbine Generator Unit 5 Blades DC 12V With Power Charge Controller Feature: Using reinforced nylon fiber on wind wheel blades , the coefficient of wind energy utilisation is increased, so as increased annual electricity generation capacity. Low start up wind speed, high efficiency, small size, low vibration. The shell is made of stainless steel die-casting, with double bearing carrier, anti-typhoon capacity is S\\TRONGER, safe and reliable operation. Easy installation, low maintenance. Three-phase permanent magnet synchronous motor. Efficient DCgenerator with high performance NdFeB permanent magnet. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged. The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage With yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle, with low starting speed and low vibration. For home use, For monitoring use, For b\\oat / marine use, For wind solar h\\ybrid streetlight use.

 

Specifications: Rated power: 10000-12000W Rated voltage:12V Start-up wind speed:2m/s Rated wind speed: 12m/s Survival wind speed:55m/s Wind wheel diameter:43.14 inch Blade length:22.57 inch Weight:9kg Number of blades: 3PCS Product Life : 15 years Certification: CE, RoHS, ISO9001 Blade Material: Nylon Fiber Cabin Material: Die Casting Aluminum Alloy Generator Type: 3-Phase AC Permanent Magnet Generator Controller system: Electromagnetic Controller brake system: Overspeedthree-phase short circuit brake Wind Direction Adjustment: Automatically Adjust The Windward Angle Operating Temperature: -40 ~ 80 ℃
  NYLON FIBER BLADE The wind turbine is made entirely of high quality aluminum and stainless steel fittings.The wind turbine blade is made of high quality nylon fiberwith 30% carbon fiber and anti-UV anti-corrosion material, which has strong flexibility and high safety factor. The optimized starting shape design improves the wind energy utilization rate and increases the power generator.Double bearings make it run with low vibration and quiet. It can also make wind power generation start from a low wind speed, rotate steadily and silently. Intelligent micro-processing controllereffectively regulates current and voltage. The surface of the wind turbine is coated with a special process that provides excellent resistance to oxidation and corrosion under any harsh conditions, as well as excellent corrosion、water and sand resistance.

 

 

MAGLEV GENERATOR Three-phase permanent magnet synchronous motor.Efficient ACgenerator with high performance NdFeB permanent magnetand unique magnetic circuit design,so that the starting torque is very small, can effectively ensure the wind starting capacity of the fan. The wind turbine is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage.The machine will shuts down,when the battery is fully charged.

 

 

PORTABLE FLANGE DESIGN Take out the wind turbine, put the wind turbine on the tower and align it with the flange hole. Mount the four flat gaskets on the four bolts, then insert the bolts into the holes corresponding to the flange. Tightening the screws by hex key. The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 1.18 inch, and the tape at the connection end is at 3.94 inch. Connect the wind turbine\'s cable to the controller and the battery must be connected to the controller before wiring.

 

Package Includes: 1x Wind Turbine(tower tubeisn\'t included) 1x 12/24V controller 1x Set Screws and Nuts

1 x Nose Cone

3 x Blades

1x Manual

Appication:For home use, for monitoring use, For b\\oat marine use, For wind solar h\\ybrid streetlight use. 





  • HOME
  • DETAIL
  • SHIPPING
  • ABOUT US
  • CONTACT US
Detail
10000W Wind Turbine Generator Unit 5 Blades DC 12V With Power Charge Controller Feature: Using reinforced nylon fiber on wind wheel blades , the coefficient of wind energy utilisation is increased, so as increased annual electricity generation capacity. Low start up wind speed, high efficiency, small size, low vibration. The shell is made of stainless steel die-casting, with double bearing carrier, anti-typhoon capacity is S\\TRONGER, safe and reliable operation. Easy installation, low maintenance. Three-phase permanent magnet synchronous motor. Efficient DCgenerator with high performance NdFeB permanent magnet. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged. The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage With yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle, with low starting speed and low vibration. For home use, For monitoring use, For b\\oat / marine use, For wind solar h\\ybrid streetlight use.

 

Specifications: Rated power: 10000-12000W Rated voltage:12V Start-up wind speed:2m/s Rated wind speed: 12m/s Survival wind speed:55m/s Wind wheel diameter:43.14 inch Blade length:22.57 inch Weight:9kg Number of blades: 3PCS Product Life : 15 years Certification: CE, RoHS, ISO9001 Blade Material: Nylon Fiber Cabin Material: Die Casting Aluminum Alloy Generator Type: 3-Phase AC Permanent Magnet Generator Controller system: Electromagnetic Controller brake system: Overspeedthree-phase short circuit brake Wind Direction Adjustment: Automatically Adjust The Windward Angle Operating Temperature: -40 ~ 80 ℃
  NYLON FIBER BLADE The wind turbine is made entirely of high quality aluminum and stainless steel fittings.The wind turbine blade is made of high quality nylon fiberwith 30% carbon fiber and anti-UV anti-corrosion material, which has strong flexibility and high safety factor. The optimized starting shape design improves the wind energy utilization rate and increases the power generator.Double bearings make it run with low vibration and quiet. It can also make wind power generation start from a low wind speed, rotate steadily and silently. Intelligent micro-processing controllereffectively regulates current and voltage. The surface of the wind turbine is coated with a special process that provides excellent resistance to oxidation and corrosion under any harsh conditions, as well as excellent corrosion、water and sand resistance.

 

 

MAGLEV GENERATOR Three-phase permanent magnet synchronous motor.Efficient ACgenerator with high performance NdFeB permanent magnetand unique magnetic circuit design,so that the starting torque is very small, can effectively ensure the wind starting capacity of the fan. The wind turbine is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage.The machine will shuts down,when the battery is fully charged.

 

 

PORTABLE FLANGE DESIGN Take out the wind turbine, put the wind turbine on the tower and align it with the flange hole. Mount the four flat gaskets on the four bolts, then insert the bolts into the holes corresponding to the flange. Tightening the screws by hex key. The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 1.18 inch, and the tape at the connection end is at 3.94 inch. Connect the wind turbine\'s cable to the controller and the battery must be connected to the controller before wiring.

 

Package Includes: 1x Wind Turbine(tower tubeisn\'t included) 1x 12/24V controller 1x Set Screws and Nuts

1 x Nose Cone

3 x Blades

1x Manual

Appication:For home use, for monitoring use, For b\\oat marine use, For wind solar h\\ybrid streetlight use. 







Buy Now

Related Items:

Powered by WordPress. Designed by WooThemes