Navigation

1 Inch Blacksmith Anvil Forge Hardy Hot Cut Creasing Stake Fuller Bending Set For Sale

1 Inch Blacksmith Anvil Forge Hardy Hot Cut Creasing Stake Fuller Bending Set
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

1 Inch Blacksmith Anvil Forge Hardy Hot Cut Creasing Stake Fuller Bending Set:
$93.90

  • Features:
  • 1. Fitment: This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation.
  • 2.Turning Bending Scrolling Fork: This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench.
  • 3. Bottom Fuller Tool: Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with.

    • VISA-POWER

    1 Inch Blacksmith Anvil Hardy Tool Set – Hot Cut, Creasing Stake, Fuller, Fork

    Features:

    1. Fitment: This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation.


    2.Turning Bending Scrolling Fork: This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench.


    3. Bottom Fuller Tool: Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with.


    4. Creasing Stake Tool: Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot.


    5. Hot Cut Tool: This plate stands straight up with a Hand Forged, hardened and Sharpened edge along the top. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick.


    6. Material: Constructed with high standard cold rolled steel (1018 steel) which is the best quality of those markets in sale, with great strength and durability for years of trouble-free Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in an anvil or can be used in a Included:

    1 x Blacksmith Anvil Hardy Hot Cut Tool
    1 x Blacksmith Anvil Hardy Bottom Fuller
    1 x Blacksmith Anvil Hardy Creasing Tool Stake
    1 x Blacksmith Anvil Hardy Turning Bending Scrolling Fork


    Item SpecificsBrand :VSSHOPSub-Type :Hot Cut, Creasing Stake, Fuller, ForkColor :BlackFeatures :Rust Resistant, ReusableMaterial :SteelMPN :Does not ApplyType :1 Inch Blacksmith Anvil Hardy Tool SetNumber in Pack :4Style :Retro
    Payment

    1. Payment methods accepted: Payoneer. Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.

    2. All major credit cards are accepted through our secure payment processor Payoneer.

    3. We ship items to Your address.Please make sure your address is correct before you pay, cause it cannot be changed once the order shipped out.

    Shipping

    1. Item will be shipped out within 1-2 business day after clear payment received.

    2. Please make sure shipping address on your account is correct & up-to-date.

    3. All of our items are shipped from our US warehouse.

    4. Please feel free to contact us by email if you cannot get your order in time.

    Please read the shipment and payment detail carefully before you offer.

    Returns Us orordernumberin allcommunications.

    DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home New Arrival ! DIY Blacksmith Accessories Outboard Boat Accessories ATV UTV Truck Accessories Caterpiller CAT Accessories DD/GM/LS Engine Parts Volvo & Mack Accessories Oil Filter Wrench Caps Car Accessories Jeep Wrangler Accessories Ford Mustang/F- Accessories Dodge Accessories Chevrolet Accessories Motocycle Accessories Tools Peterbilt Accessories Lawn Mower Parts OtherHigh RecommendedAutomotive Part Tool Crankshaft Gear&Front Crank Seal Installer JDG954B for John Deere 1039 4045 6059 USD 189.97 Front & Rear Crankshaft Seal Remover Installer Kit for Cummins ISX QSX ISX15/12 USD 375.58 3162992 Front Crankshaft Seal Remover & Installer Kit for Cummins ISX QSX Diesel USD 197.00 61850 Truck Hub Seal Installer Set for Class 7 & 8 M Duty & Road Trucks Trailers USD 104.95 Knife Making Tongs Bladesmith Tong Set & Blacksmith Hammer 1.5 kg Forge Tools USD 131.97 6.0L 6.4L Front & Rear Crankshaft Seal Wear Ring Installer Remover Set For Ford USD 799.99 Front & Rear Crankshaft Seal Wear Sleeve Installer For CAT 3406 3408 C-15 USD 272.99 Transmission Pto Fast Cooler Manual Trans for GM NV4500 NV5600 G56 Ford ZF 5 USD 97.89 4531 Harmonic Balancer Puller Installer Set for Harmonic Balancers Drive Pulleys USD 93.50 Cummins NT 855 & N14 Rear Seal & Wear Sleeve Installer Tool Alt ST-262 4919705 USD 259.00 3163021 3163069 For Cummins ISX QSX Timing Injector Cam Gear Puller Tool Kit USD 94.99 Double Clutch Dry DPS6 Transmission Installer Remover Tool for Ford Volvo Focus USD 159.98 60\" LED Tailgate Strip Light Bar Reverse Brake Turn Signal Light for Car Truck USD 15.97 Hot Item ECX270861 Bottom Mount Pressure Gauge for Hayward Sand D.E. Pool Filter 60 PSI USD 13.98 Extended Run Fuel Gas Cap For Honda Generator EU2000i EU1000i Fits 1/4\"NPT Line USD 10.50 60\" LED Tailgate Strip Light Bar Reverse Brake Turn Signal Light for Car Truck USD 15.97 Extended Run Gas Cap Adapter w/ Brass Hose for Yamaha EF2000is EF1000is (Silver) USD 14.34 Trim Tilt Pin Wrench AMT0006 - 32mmx4mm for Yamaha Suzuki Johnson Evinrude USD 33.56 New List Item For Watts 0061888 9D-M2 3/4 Backflow Preventer With Vent 3/4 Dual Check Valve USD 85.98 2Pcs Large Collar O-ring R0586300 For Jandy Zodiac Nature 2 Fusion Inground USD 13.99 AR2840561 Pressure Washer Pump Bushing for Anovi Reverberi RMW2.2G24 SRMW2.2G26 USD 11.96 for 354530 Pot Fits for Sta-Rite Dynamo Aboveground Swimming Pool Filter Pump USD 57.98 Beginners Apprentice Metalsmith Jewelry Making Tool Set Metalsmithing Tools Kit USD 276.99 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us 1 Inch Blacksmith Anvil Hardy Tool Set – Hot Cut, Creasing Stake, Fuller, Fork
    Item SpecificsBrand :VSSHOPSub-Type :Hot Cut, Creasing Stake, Fuller, ForkColor :BlackFeatures :Rust Resistant, ReusableMaterial :SteelMPN :Does not ApplyType :1 Inch Blacksmith Anvil Hardy Tool SetNumber in Pack :4Style :Retro

    Features:

    1. Fitment: This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation.


    2.Turning Bending Scrolling Fork: This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench.


    3. Bottom Fuller Tool: Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with.


    4. Creasing Stake Tool: Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot.


    5. Hot Cut Tool: This plate stands straight up with a Hand Forged, hardened and Sharpened edge along the top. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick.


    6. Material: Constructed with high standard cold rolled steel (1018 steel) which is the best quality of those markets in sale, with great strength and durability for years of trouble-free Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in an anvil or can be used in a Included:

    1 x Blacksmith Anvil Hardy Hot Cut Tool
    1 x Blacksmith Anvil Hardy Bottom Fuller
    1 x Blacksmith Anvil Hardy Creasing Tool Stake
    1 x Blacksmith Anvil Hardy Turning Bending Scrolling Fork



    PaymentShippingReturnsContact Us

    1. Payment methods accepted: Payoneer. Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.

    2. All major credit cards are accepted through our secure payment processor Payoneer.

    3. We ship items to Your address.Please make sure your address is correct before you pay, cause it cannot be changed once the order shipped out.

    1. Item will be shipped out within 1-2 business day after clear payment received.

    2. Please make sure shipping address on your account is correct & up-to-date.

    3. All of our items are shipped from our US warehouse.

    4. Please feel free to contact us by email if you cannot get your order in time.

    Please read the shipment and payment detail carefully before you offer.

    orordernumberin allcommunications.


    All right reserved.



    Buy Now
    Related Items:

    100 1-1/16

    100 1-1/16" Inch Chrome Steel Replacement Pinball Machine Balls

    $111.75


    Pyramid Unpolished shungite 50x50mm 1,97 inches EMF protection Russia C60 picture

    Pyramid Unpolished shungite 50x50mm 1,97 inches EMF protection Russia C60

    $9.00


    Ontario OKC 3-S USMC Bayonet 8

    Ontario OKC 3-S USMC Bayonet 8" Blade/Sheath 1 Of 3000 Made (B) Grade. Very Nice

    $120.00


    Powered by WordPress. Designed by WooThemes