Vacuum Pressure Transducer Sender Sensor For Air Water Oil Fuel Tank 0-100 psi For Sale

Vacuum Pressure Transducer Sender Sensor For Air Water Oil Fuel Tank 0-100 psi


Buy Now

Vacuum Pressure Transducer Sender Sensor For Air Water Oil Fuel Tank 0-100 psi:
$14.18

Warranty:3 Year
Note: Customizing for Specific Quantity! -14.5-30psi

Description:
·Brand new vacuum pressure transducer. Stainless steel body.
·Input: -14.5 psi (-1.0 bars) to 30 psi (2.0 bars).
·Output: 0.5V -4.5V linear voltage output.
·Works for boost vacuum chamber, oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
·Accuracy: within 0.5% of reading (full scale).
·Thread: 1/8” 27 NPT.
·Wiring connector: water sealed quick disconnect. Mating connector is included.
·Wiring: Red: +5V; Black: ground; Green: signal output;
·It is an advance pressure sender than traditional mechanical pressure sender.
·Our material is using top of line 316 stainless steel and high temperature auto-graded plastic.
·Brand new pressure transducer. 316 Stainless steel />·Stainless steel body.
·100% brand new and high quality,Durable.
·Installation instructions not included, Tool not included.
·Input: 0-100 psi.
·Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.
·Current draw: less than 4 mA.
·Accuracy: within 1.5% of reading (full scale).
·Burst (over or max pressure) pressure: minimum 200 psi.
·Wiring: Red for +5V. Black for ground. Blue for signal output.
·Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
·Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
·Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
·Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
·This is a high quality pressure sender, with ceramic pressure chip sensor inside.
·It is an advance pressure sender than traditional mechanical pressure sender.

Package includes:
1 * Pressure transducer />·Stainless steel body.
·100% brand new and high quality,Durable.
·Input: 0-150 psi.
·Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 75 psi outputs 2.5V, 150 psi outputs 4.5V.
·Current draw: less than 4 mA.
·Accuracy: within 1.5% of reading (full scale).
·Burst (over or max pressure) pressure: minimum 300 psi.
·Wiring: Red for +5V. Black for ground. Blue for signal output.
·Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
·Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc
·Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
·Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
·This is a high quality pressure sender, with ceramic pressure chip sensor inside.
·It is an advance pressure sender than traditional mechanical pressure sender.

Package includes:
1 * Pressure transducer />·Stainless steel body.
·100% brand new and high quality,Durable.
·Input: 0-300 psi.
·Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 150 psi outputs 2.5V, 300 psi outputs 4.5V.
·Current draw: less than 4 mA.
·Burst (over or max pressure) pressure: minimum 600 psi.
·Wiring: Red for +5V. Black for ground. Blue for signal output.
·Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
·Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
·Accuracy: within 1.5% of reading (full scale).
·Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
·Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
·This is a high quality pressure sender, with ceramic pressure chip sensor inside.

Package includes:
1 * Pressure transducer />·Stainless steel body.
·100% brand new and high quality,Durable.
·Input: 0-15 psi.
·Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 7.5 psi outputs 2.5V, 15 psi outputs 4.5V.
·Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
·Accuracy: within 1.5% of reading (full scale).
·Current draw: less than 4 mA.
·Burst (over or max pressure) pressure: minimum 100 psi.
·Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
·Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
·Wiring: Red for +5V. Black for ground. Blue for signal output.
·Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
·This is a high quality pressure sender, with ceramic pressure chip sensor inside.

Package includes:
1 * Pressure transducer Stainless steel body.· 100% brand new and high quality,Durable.· Installation instructions not included, Tool not included.· Input: 0-150 psi.· Power: 12V (10V-25V wide power range).· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 75 psi outputs 2.5V, 150 psi outputs 4.5V.· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.· Accuracy: within 1.5% of reading (full scale).· Current draw: less than 4 mA.· Burst (over or max pressure) pressure: minimum 300 psi.· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.· Wiring: Red for +12V. Black for ground. Blue for signal output.· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.· This is a high quality pressure sender, with ceramic pressure chip sensor inside.Package includes:1 * Pressure Stainless steel body.· 100% brand new and high quality,Durable.· Installation instructions not included, Tool not included.· Input: 0-100 psi.· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.· Accuracy: within 1.5% of reading (full scale).· Thread: 1/8”-27 NPT.· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.· Wiring: Red for +12V. Black for ground. Blue for signal output.· It is an advance pressure sender than traditional mechanical pressure sender.· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.Package includes:1 * Pressure />
Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-200 psi.
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, 200 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 400 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +5V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer
80psi/5V

Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-80 psi.
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 40 psi outputs 2.5V, 80 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 200 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +5V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer
500psi/12V

Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-500 psi.
· Power: 12V (10V-25V wide power range).
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 250 psi outputs 2.5V, 500 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 1000 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +5V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer
300psi/12V

Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-300 psi.
· Power: 12V (10V-25V wide power range).
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 150 psi outputs 2.5V, 300 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 600 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +12V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.

Package includes:
1 * Pressure transducer


2500psi/5V

Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-2500 psi.
· Power: +5V tp 12V range, it takes wide range.
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 1250 psi outputs 2.5V, 2500 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 3000 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +5V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.

Package includes:
1 * Pressure transducer

On May 5, 2022 at 07:50:53 PDT, seller added the following information:



Buy Now

Related Items:

Vintage GE Vacuum Pressure A.S.M.E. Standard Square Steampunk Gauge picture

Vintage GE Vacuum Pressure A.S.M.E. Standard Square Steampunk Gauge

$49.99



Radiator Pump Pressure Leak Tester Kit Vacuum Pressure Cooling System Tester picture

Radiator Pump Pressure Leak Tester Kit Vacuum Pressure Cooling System Tester

$79.90



stainless steel pressure tank 304 small air tank 0.3L vacuum buffer air pressure picture

stainless steel pressure tank 304 small air tank 0.3L vacuum buffer air pressure

$64.12



Powered by WordPress. Designed by WooThemes