LCD Digital Multimeter Voltmeter Ammeter Ohmmeter Volt AC DC Tester Leads Meter for Sale

LCD Digital Multimeter Voltmeter Ammeter Ohmmeter Volt AC DC Tester Leads Meter For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

LCD Digital Multimeter Voltmeter Ammeter Ohmmeter Volt AC DC Tester Leads Meter:
$6.29

Product description:Colour: OrangeWeight ：150g(Approx.)Type: Digital LCD Multimeter Voltmeter Ohmmeter AmmeterCurrent Range: 2mA-10A ±(1.0%+2dgts)Package size: 16*9*5CMAC Voltage Range:: 200/600VInput Protection Features: HRC Fuse, Shunt ResistorDC Voltage Range:: 200mV/2/20/200/600VResistance:: 200/2k/20k/200k/2MΩModel: DM850Diode & Audible Continuity:: Diode testing 2.4V,1.5mA; Buzzer Sounds＜30±20ΩFeature 1:: Low Battery IndicationFeature 2:: Data HoldBattery:: 9V battery,NEDA 1604 6F22 (battery not included)Display:: 3 Digit LCD MAX 1999Form Factor: PocketTest/Measurement Functions: AC Current, AC Voltage, Capacitance, Continuity Test, DC Current, DC Voltage, Diode Test, Duty CycleMax. display: 1999Dynatron: YesLCD Backlight: YesContinuity Buzzer: Yes (resistance lower than 30Ω±20Ω)Input Impedance for DCV: 1MΩSample Rate: 3times/SLow Battery Indication: YesData Hold: YesAccuracy: ±a% of reading: ± N0 digits.Environmental temperature : 23℃±2℃.Relative Humidity: <75%.FRONT PANEL DESCRIPTION 1. FUNCTION AND RANGE SWITCH This switch is used to select the function ano desired range as well as to turn on the instrument.To extend the life of this battery, the switch should be in the \"OFF\" position when the nstrument is not in use. 2. DISPLAY 3? digit, 7 segment, 0.5\" high LCD. 3. \"Common\" JACK Plug in connector for black (negative) test lead 4. \"VQmA\" JACK Plug in connector for red (Positive) test lead for all voltage and resistance and current (except 10A) measurements. 5. \"10A JACK Plug in connector to red (positive) test lead for 10A measurement.Notes: 1.Pls do not change the inner circuit to aviod damaging the ammeter 2.Do not connect it to the voltage over 1000VDC or 750VAC 3.Make sure not connect the error measure range 4.Pls do not use the ammeter if the back cover is wrong 5.Pls remove the pen and cut off the power before replacing battery and fuze 6.Do not directly plug into the socket to measure the current; otherwise, the meter will be damaged 7.Please read the instructions for specific measurement methods
Package included:1 x Digital LCD Multimeter Voltmeter Ohmmeter Ammeter (Battery Not Included)2 x Test Leads1 x Packing Box1 x English Manual

On Oct 16, 2024 at 09:57:10 PDT, seller added the following information: