KIT Signal Generator RF Coupler for Transistor Radio Alignment (FY6900 & Others) For Sale

KIT Signal Generator RF Coupler for Transistor Radio Alignment (FY6900 & Others)
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

KIT Signal Generator RF Coupler for Transistor Radio Alignment (FY6900 & Others):
$12.95

Please Note: This is the KIT version which requires assembly.

If you prefer the Assembled version,Find it HERE

This Kit Contains

• A plastic box with a hole in the appropriate position

• A ferrite antenna coil glued into place

• BNC panel mounted connector with flat washer, ground lug and nut

• Ceramic coupling capacitor

• BNC Male-to-Male adapter

You Will Also Need

• A low wattage soldering iron

• 60/40 solder

• Wire cutters

• Needle nose plyers

• ½” Nut driver (Optional but very helpful)

• Super Glue (Optional but helpful)

If you want to use an FY6900 DDS signal generator or other contemporary RF signal source for radio alignment, you cannot employ the old "connect a loop of wire to the output" trick. It will not work. The 6900 and many other newer signal generators often see wire loops as short circuits. That will cause the output to shut down, and potentially damage your signal generator.

This compact coupler kit contains a loop antenna and the necessary capacitive isolation to be compatible with the FY6900 and similar devices. The plastic enclosure keeps those components safe. It measures about 2" Long x 1-1/4" Wide x 5/8" Deep. (55mm x 35mm x 15mm). Depth at the connector extends to about one-inch (25mm).

The BNC connector makes it compatible with many contemporary generators. The included Male > Male adapter makes it easy to connect the coupler directly to your generator, as shown in the second photo. Alternately, you can use your own BNC to BNC cable of any reasonable length. If you have already purchased an FY6900, it comes with the perfect BNC cable.

NOTE: If you don't own an FY6900 DDS Signal Generator yet, check out the complete packages that I sell. The bundles include a generator, this coupler, a non-metallic alignment tool assortment, plus 24 pages of detailed, full color instructions showing you how-to use these items to align transistor radios and getting them to track properly. Look for them in the Test Equipment section of my Childhoodradio store. Purchasing the bundle, rather than the coupler, alignment tools and FY6900 will save you some money as well.

I also sell specialty cables that convert from the BNC coupler connection to vintage Amphenol-style connectors used by RF generators such as those from Heathkit, B&K, Eico and others.

Save your gear, save some time, and preserve your sanity. Grab one of these couplers or, better yet, the complete bundle for your bench today.

Prompt, careful shipping from the US as always.

Here's what owners are saying

  • Great product works very well and excellent customer service to include his website with tips and tutorials!!! Shipped very quickly and packed well!
  • 100% satisfied, wonderful information, easy to understand.
  • Great item!! Great seller!! Will buy from again for sure!
  • Great price. Awesome coupler. Your website has a lot of great info. Thanks
  • Great deal, went above and beyond by including adapters to go with it


Obviously, the FY9600 and the radio under test shown in the photos are for illustrative purposes and are not included in the offering.

If you want to use an FY6900 DDS signal generator or othercontemporary RF signal source for radio alignment, you cannot employ the old"connect a loop of wire to the output" trick. It will not work. The6900 and many other newer signal generators often see wire loops as shortcircuits. That will cause the output to shut down, and potentially damage yoursignal generator.

This compact coupler kit contains a loop antenna and thenecessary capacitive isolation to be compatible with the FY6900 and similar devices.The plastic enclosure keeps those components safe. It measures about 2"Long x 1-1/4" Wide x 5/8" Deep. (55mm x 35mm x 15mm). Depth at theconnector extends to about one-inch (25mm).

The BNC connector makes it compatible with many contemporarygenerators. The included Male > Male adapter makes it easy to connect thecoupler directly to your generator, as shown in the second photo. Alternately,you can use your own BNC to BNC cable of any reasonable length. If you havealready purchased an FY6900, it comes with the perfect BNC cable.

PLEASE NOTE: If you don't own an FY6900 DDS Signal Generator yet,check out the complete packages that I sell. The bundles include a generator,this coupler, a non-metallic alignment tool assortment, plus 24 pages ofdetailed, full color instructions showing you how-to use these items to aligntransistor radios and getting them to track properly. Look for them in the TestEquipment section of my Childhoodradio store. Purchasing the bundle, ratherthan the coupler, alignment tools and FY6900 will save you some money as well.

I also sell specialty cables that convert from the BNCcoupler connection to vintage Amphenol-style connectors used by RF generatorssuch as those from Heathkit, B&K, Eico and others.

Save your gear, save some time, and preserve your sanity.Grab one of these couplers or, better yet, the complete bundle for your benchtoday.

Prompt, careful shipping from the US as always.

Here's what owners are saying:

  • Great product works very well and excellent customer serviceto include his website with tips and tutorials!!! Shipped very quickly andpacked well!
  • 100% satisfied, wonderful information, easy to understand.
  • Great item!! Great seller!! Will buy from again for sure!
  • Great price. Awesome coupler. Your website has a lot ofgreat info. Thanks
  • Great deal, went above and beyond by including adapters togo with it

Obviously, the FY9600 and the radio under test shown in thephotos are for illustrative purposes and are not included in the offering.

CLICK HERE to visit my store (ChildhoodRadio) where you will find more sale items, tools supplies and other items of interest to collectors.

SIGN UP HERE to receive occasional emails when I launch new and unusual items. (This is what calls their Newsletter feature.)



Buy Now

Related Items:

KIT Signal Generator RF Coupler for Transistor Radio Alignment (FY6900 & Others) picture

KIT Signal Generator RF Coupler for Transistor Radio Alignment (FY6900 & Others)

$12.95



US Army Signal Corps M3 Cable Cutter / Communications Wire Repair Kit picture

US Army Signal Corps M3 Cable Cutter / Communications Wire Repair Kit

$49.99



Emergency Signaling kit w/ 2 Camping Mirrors, flag, Whistle,P51, P38, tape, bag  picture

Emergency Signaling kit w/ 2 Camping Mirrors, flag, Whistle,P51, P38, tape, bag

$28.99



Powered by WordPress. Designed by WooThemes