Analog Multimeter Voltmeter Ammeter Ohmmeter Tester Meter OHM AC/DC Volt for Sale

Analog Multimeter Voltmeter Ammeter Ohmmeter Tester Meter OHM AC/DC Volt For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Analog Multimeter Voltmeter Ammeter Ohmmeter Tester Meter OHM AC/DC Volt:
$9.19

Description Item Description:

Product Model: MF-110A
Range Display: Mechanical Pointer Needle
Performance Mode: Manual Range
Protective Design: Insulating Material
Power Supply: 1 x AA Battery (Not Included)

DC Voltage: 10V / 50V / 250V / 1000V
Operating Mode: Handheld
Material: ABS
DC Current: 0.5mA / 50mA / 500mA
Style: Pointer-type
AC Voltage: 10V / 50V / 250V / 1000V
Display Type: Pointer Display
Product Name: Analog Pointer Multimeters Testing Instrument
Features:
- Especially suitable for e-learning classes, amateur radio experiment of primary school students.
- Made of engineering plastics, is light in whole, small in size and convenient to carry.
- Pocket multimeter, with multiple measurement functions, full range protection and high safety performance.
- The scale is accurate, the dial is clear, the gear is accurate, and the sense of pause between gears is strong.
- The regulation is simple and convenient, the workmanship is exquisite, and the measurement is accurate.
- Multiple protection. Adopt overvoltage, overcurrent Self Fusing protection circuit, meter overload protection, etc.
- The test pen is made of wire, which is not easy to break and can be used for a long time.
- Suitable for machine maintenance, communication, power, circuit equipment maintenance, colleges and universities student experiment, etc.
Points for Attention
1.Before measurement, check whether the position of the range selection knob is correct.
2.If the current or voltage to be measured is unknown, set the measuring range to the highest gear, and conduct the measurement after correct measurement and selection.
3.The maximum DC current range is 250(500)mA, and the maximum voltage range is 500(1000)V.
Measurement Steps
1.First check whether the pointer is on the zero indexing line, otherwise turn the zero adjuster for adjustment.
2.DC Current (DCA)
(1)Insert the red plug of the test rod into the instrument "+" and the black plug into the instrument "-".
(2)Set the measuring range to the highest gear of the current measuring range.
(3)Contact the probe of the test rod with the circuit to be tested and connect it in series with the circuit to be tested.
(4)Read the indicated value from the second scale (mAV) of the dial.
(5)If the reading on the scale is too small, turn down one gear until the best indication is obtained.
3.DC / AC Voltage (DCV, ACV)
(1)Set the range selection to the maximum limit of voltage.
(2)Connect the probe of the test rod across the circuit under test (in parallel).
(3)Read the indicated value from the second scale. Note that the 10V gear reads the indicated value from the third scale (special for AC 10V).
(4)If the reading on the scale is too small, turn down one gear until the best indication is obtained.
4.Resistance (OHM)
(1)Set the measuring range to the corresponding gear.
(2)Short circuit the probe of the test rod and adjust the adjustment knob to stop the pointer on the zero ohm dividing line. If the pointer cannot be adjusted to the zero ohm dividing line, the battery is exhausted and needs to be replaced.
(3)Read the resistance value from the first scale (OHM) during measurement.
(4)Use the test rod probe to measure the resistance of the device under test, which shall be connected in series with the device under test.
(5)Note: If the resistance of the circuit is measured, cut off the power supply of the circuit and discharge all capacitors.
Place of Application: Battery / Resistance / DC Current Test, Machine Maintenance / Communication / Power / Circuit Equipment Maintenance
Note:
The multimeter is a normal product, only for simple measurements.

Package Including:

Package Including:
1 x MF-110A AC/DC Analog Multimeter((Not Included Battery)
2 x Test Pen

Product Weight: 80 G / 2.82 Ounces
Product Dimensions (L*W*H): 9.5*7.5*2.5 CM / 3.74*2.95*0.98 Inches
Package Weight: 83.0 G / 2.93 Ounces
Package Dimensions (L*W*H): 10.0*8.0*2.7 CM / 3.94*3.15*1.06 Inches
Retail Packaging: No, No Packing

Payment

1. When put the order in the awaiting payment,Payment must be paied within 20days.
2. We accept payment by Paypal
3.Please write down your special requests (color, size, etc.) in the NOTE when you make payment.
4.TOTAL AMOUNT includes the final price plus S&H(Shipping and Handling).

Shipping

1. We only ship to confirmed address
2. Item will be shipped within 48 hours after payment received, excluding weekends and holidays.
3. Most orders are delivered within the stated shipping time at the time of purchase
4. Shipping are not available for PO BOX, Parcel locker, Parcel collect
5. If you don't receive your shipment within 35 days after payment, please feel free to contact us. We will take proper actions to solve the problem for you

Retrun