Agilent 4291B RF Impedance/Material Analyzer 1MHz-1.8GHz w/Test Heads, Cal Kit + For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Agilent 4291B RF Impedance/Material Analyzer 1MHz-1.8GHz w/Test Heads, Cal Kit +:
$10500.00

This is an Agilent Keysight 4291B RF Impedance Analyzer with the Test Station, Low and High Impedance Test Heads, and Calibration Kit (includes Open, Short, Load, and Low Loss Capacitor). This unit is still under current Keysight Calibration, though I do not have the cert. It\'s in great shape and works perfectly. No options are installed.

The Agilent 4291B RF impedance/material analyzer provides a total solution for high-accuracy and easy measurement of surface-mount components and dielectric/magnetic materials. The Agilent 4291B uses a direct current-voltage measurement technique, opposing the reflection measurement technique, for more accurate impedance measurement over wide impedance range.Basic impedance accuracy is +/- 0.8%. High Q accuracy enables low-loss component analysis. An internal synthesizer sweeps frequency from 1 MHz to 1.8 GHz with 1 mHz resolution. A 1.8-m error-less cable connects the analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT/MUT.The Agilent 4291B also provides automatic level control and monitor of test signals by using IBASIC programming function; devices can be measured under a constant voltage or current.

The Agilent 4291B has two measurement channels; each channel can be set to measure a single (e.g. Z) or dual (e.g. Z-theta) impedance parameter. The color TFT with split-display can show both active traces and memory traces (stored in RAM). A built-in floppy disk drive stores programs and test data in either LIF or MS-DOS format. With built-in IBASIC, you can control external test equipment such as a temperature chamber or wafer prober directly from the Agilent 4291B. You do not need a separate instrument controller.

Shipping in the USA is $85. International buyers contact me for shipping quote. I can also ship on your account with UPS, FedEx, or DHL