Agilent 4291A RF Impedance/Material Analyzer 1MHz-1.8GHz w/Accessories, options For Sale

Agilent 4291A RF Impedance/Material Analyzer 1MHz-1.8GHz w/Accessories, options
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

Agilent 4291A RF Impedance/Material Analyzer 1MHz-1.8GHz w/Accessories, options:
$5725.00

This is an Agilent 4291A RF Impedance and Material Analyzer with options 001 C Bias, 002 Materials Measurement Firmware, 1D5 High Stability Timebase, and 1C2 HPBasic. This analyzer includes the test station, high and low impedance test heads, and the calibration kit.

  • Basic Accuracy ± 0.8%
  • Advanced Calibration and Error Compensation.
  • Four component test fixtures (DUT size: 0.5 mm to 20 mm)
  • Independent parameter selection in 2 channels
  • Direct read-out permittivity, permeability
  • Two material fixtures (opeating temperature: -55 degree to +200 degree C)
  • Versatile analysis (temperature, cole-cole plot, relaxation time)
  • Swept parameters (frequency, ac level, dc bias, temperature)

    HP 4291A impedance/material analyzer provides a total solution for high-accuracy and easy measurement of surface-mount components and dielectric/magnetic materials. The 4291A uses a direct current-voltage measurement technique, as opposed to the reflection measurement technique, for more accurate impedance measurement over wide impedance range. Basic impedance accuracy is ± 0.8%. High Q accuracy enables low-loss component analysis. An internal synthesizer sweeps frequency from 1 MHz to 1.8 GHz with 1 mHz resolution. A 1.8 m error-less cable connects the analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT/MUT.

    The 4291A also provides automatic level control and monitor of test signals by using I-BASIC programming function; devices can be measured under a constant voltage or current. Measure bias-dependent impedance characteristics with optional dc bias (up to 40V and 100mA). At the push of a button, the built-in Equivalent Circuit Analysis Function automatically calculates the circuit constant values of five circuit models (similar to 4194A\'s Equivalent Circuit Analysis Function.)

    The 4291A has two measurement channels; each channel can be set to measure a single (e.g., Z) or dual (e.g., Z-theta) impedance parameter. The color CRT with split-display can show both active traces and memory traces (stored in RAM). A built-in floppy disk drive stores programs and test data in either LIF or MS-DOS format.

  • Shipping in the USA is $85. International buyers contact me for shipping quote. I can also ship on your UPS, FedEx, or DHL Account.



    Buy Now

    Related Items:

    Powered by WordPress. Designed by WooThemes