Mini Curve Tracer Tester. Test Semiconductors, Troubleshooting, Technicians Tool for Sale

Mini Curve Tracer Tester. Test Semiconductors, Troubleshooting, Technicians Tool For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Mini Curve Tracer Tester. Test Semiconductors, Troubleshooting, Technicians Tool:
$69.50

Alaonix Mini Curve Tracer TesterAlaonix Curve Tracer 1.0 is a small and light device. User can use it to check electronics semiconductor – transistors, diodes, zeners , capacitor and resistor, PCB troubleshooting, it's Electronic Technician's good tools ….. Connect this device with an oscilloscope capable of being set in XY mode and you have a very great tester.

This device has Manual mode and Remote Mode. User can use hands to operate it or use computer to control it. Also user can use Remote Mode to calibrate it.

Please check your oscilloscope can handle a 24V peak to peak voltage on the input. Most scopes should not have this problem, may have the problem for use with a computer or some of the very low cost LCD/Arduino based scopes, please check your scope is capable before to use the device.

TECH SPECS

Display:1.3" BW OLED display

Serial Baud:9600, 8, N, 1

Waveform:SineWave

Test Frequency:100Hz, 200Hz, 500Hz and 1000Hz (< +/-3%)

Test Voltage:6V, 12V, 24V (p-p) (< +/-5%)

Output Voltage:Contant 6V (p-p) (< +/-5%)

Device Power:5V (Mini USB Connector)

Current:<100mA

Dimensions:78 x 52 x 17 mm

Weight:70g (2.5oz)

The device case is 3D printed to precise tolerance using high quality PLA.