1PCS HX711 24 Bit Dual Channel Precision Sensor Module 100g Weight Sensor Module For Sale
This item has been shown 38 times.
1PCS HX711 24 Bit Dual Channel Precision Sensor Module 100g Weight Sensor Module:
1PCS HX711 24 Bit Dual Channel Precision Sensor Module 100g Weight Sensor ModuleProduct Image:
HX711 Weighing Sensors Module
This module uses 24 high-precision A / D converter chip hx711, is designed for high-precision electronic scale and design, with two analog channel input, the internal integration of a gain programmable amplifier 128. Input circuit can be configured to provide an electrical bridge bridge voltage (such as pressure, weight) sensor model is an ideal high-precision, low-cost sampling front-end module• Two selectable differential input channels
• On-chip active low noise PGA with selectable gain of 32, 64 and 128
• On-chip power supply regulator for load-cell and ADC analog power supply
• On-chip oscillator requiring no external component with optional external crystal
• On-chip power-on-reset
• Simple digital control and serial interface: pin-driven controls, no programming needed
• Selectable 10SPS or 80SPS output data rate
• Simultaneous 50 and 60Hz supply rejection
• Current consumption including on-chip analog power supply regulator: normal operation < 1.5mA, power down < 1uA
• Operation supply voltage range: 2.6 ~ 5.5V
• Operation temperature range: -40 ~ +85℃
- 0-100g range silver tone aluminum wired weighing load cell, high accuracy, simple structure, easy installation.
- Widely used for electronic scales and balance, material scales, jewelry scalesand control system.
Specifications:Product Name Weighing Load Cell Rated Load 100g/0.22Lb Ranted Output 1.0 +/-10 %mV/V Non-Linearity 0.02%F.S. Hysteresis 0.02%F.S. Repeatability 0.02%F.S. Zero Balance +/-2%F.S. Temp Effect on Zero 0.025%F.S./10C Temp Effect on Zero Output 0.025%F.S./10C Creep (30min) 0.03%F.S. Input Impedance 1130+/-10 Ohm:1090+/-10 Ohm Output Impedance 1000+/-10 Ohm Insulation > 2000 Megohm / 50V DC Compensated Temperature Range -10C~40C Operating Temperature Range -20C~60C Safe Overload 150%F.S. Ultimate Overload 300%F.S. Input End Red+, Black- Output End Blue+, White- Recommended Excitation 10V Maximum Excitation 15V Load Cell Size 47 x 12 x 6mm / 1.9" x 0.47" x 0.24" (L*W*T) Thead Hole Diameter 3mm /0.12" Hole Center Distance 40 x 6 mm / 1.6" x 0.24" (L*Max.W) Cable Length 8cm / 3.1" Main Color Silver Tone Material Aluminum Alloy Weight 15g Package included： 1PCS * HX711 Weighing Sensor Dual-Channel 24 Bit Precision AD Pressure Module 1PCS*100g Weight Sensor Module
- We appreciate your response very much. As it will motivate us do better. If you have any questions with our goods or service, Please kindly contact us firstly before leaving negative response. Thank you in advance
1. All merchandise will be carefully test before shipping. We will try our best to avoid any quality problem.
2. We promise warranty for quality in one year and we will repair it free of charge. The returning shipping should be paid by customer.
3. If you are not satisfied with the product, Please contact us. We'll provide you a satisfying solution.Shipment
1.Normmly we will send the goods within 1-3 working days after your payment is verified .
2.Please check if the goods are in good condition and sign before the delivery man leaves.If you find the product is lost or damaged on the way. Please take photo andlet the delivery men confirm it. Then we will help you let the shipping company compensate you.On Jul-18-19 at 06:21:09 PDT, seller added the following information: