12V DC Electric Solenoid Valve 1/2\" NPT for Water Air Gas for Sale

12V DC Electric Solenoid Valve 1/2\" NPT for Water Air Gas For Sale

$12V DC Electric Solenoid Valve 1/2\$
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

12V DC Electric Solenoid Valve 1/2\" NPT for Water Air Gas:
$23.99

[Size]: 102mm*62mm (4.016 \'\' * 2.44 \'\'); thread diameter: 20mm (0.787 \'\'); interface pipe diameter: 1 / 2 \'\' NPT thread; flow diameter: 16mm (0.63 \'\').
[Material]: Mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
[N/C]: It is closed when the power is not supplied, which effectively ensures the safety of use.
[Wide application]: Applicable temperature: - 5 ℃ ~ 80 ℃. Working pressure: water, air: 0 ~ 7kgf/cm2; oil: 0 ~ 5kgf/cm2. Working environment: air, water, oil and gas.
[Attention]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working.