100A DC Digital Watt KWH Current Power Energy Meter Ammeter Voltmeter 7-100V US For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
100A DC Digital Watt KWH Current Power Energy Meter Ammeter Voltmeter 7-100V US:
$18.98
ads
Free Shipping from United States Releated Voltmeters, Maybe you like! Click the picture & find them!DC 0-30VDC 5-120VDC 100A Voltage Current Watt Power Measuring Range: DC 6.5 ~ 100V
Package Include:
- 1 * 100A LCD Panel DC Power Meter (including the parameter measurement function (voltage, current, active power, energy)
- Voltage alarm function (over voltage alarm threshold, backlight and voltage flashing to alarm).
- The reset function of energy key.
- Store data when power off.
- Large-screen LCD (display voltage, current, active power, energy at the same time)
- Backlight function.
Display 1KW, the display format is 0.0~999.9W;
About Setting:
- 1.Backlight control
- Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.
- 2.Reset energy
- Step1: Long press the key until the power display area display “CLr”, then release the key.
- Step2: At this moment, the energy is flashing to prompt this is the energy reset state, if short press the key again, then the energy value is cleared and exit the reset flashing state.
- Step 3: If there is no operation within 5 seconds, it means the energy value is not cleared and will exit the reset state.
- 3.Set voltage alarm threshold
- Step1: Long press the key until the power display area display “SET”, then release the key.
- Step2: After enter this state, the voltage area display the current high voltage alarm value, the current area display the current low voltage alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operation over 3 seconds, it will switch the digit position automatically, from the high voltage alarm value to the low voltage alarm value, there are total six digits, the range of the voltage alarm threshold is 6.5~99.9V;
- Step3: After finish the setting, long press the key until the screen display “PASS”,that means you set successfully and will exit the setting state automatically.
- 4.Choose measuring range(If you have 100A/50A current shunt, the current testing range of meter can be switch between 50A and 100A.)
- Step1: Long press the key until the power area display “Curr”, then release the key
- Step2: At this moment, the current area display “100A”, short press the key to switch between“100A”and “50A”, to prompt the range of the external shunt is 100A/75mV or 50A/75mV, please note that this meter can only use these two specification shunt.
- Step3: Long press the key to exit the setting state or after no operation within 3 seconds it will store automatically and exit the setting module is suitable for indoor, please do not use outdoor.
- Applied load should not exceed the rated voltage, current.
- Wiring order can’t be wrong.
Related Items:
Batman 100-A DC Comics Vol-3 (2016-Current)
$49.95
Batman #100A Jimenez CGC 9.6 2020 4373114004
$36.00
Superman(vol. 2) #100a - DC Comics - Combine Shipping
$3.59