`Finger Pulse Oximeter Blood Oxygen Saturation Heart Rate Measuring SpO2 Monitor For Sale

`Finger Pulse Oximeter Blood Oxygen Saturation Heart Rate Measuring SpO2 Monitor
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

`Finger Pulse Oximeter Blood Oxygen Saturation Heart Rate Measuring SpO2 Monitor:
$11.99

Finger Pulse Oximeter Blood Oxygen SpO2 PR PI Heart Rate Measuring MonitorDescription:
  • Accurate and Reliable - Our pulse oximeter can accurately determine your SpO2 (blood oxygen saturation levels), perfusion index, pulse rate and pulse strength in 8 seconds and large LED and backlight display make this pulse oximeter fingertip very easy to read.
  • Lightweight and Portable - This oxygen saturation monitor are very light and small size, low power consumption and convenient in carrying. Also it comes with a detachable lanyard which can measure your oxygen saturation anywhere.
  • Convenience - One button operation and shut down automatically without operation in 8 seconds. ABS material, the fingertip clip use silica gel material which are soft and easy to apply. Oxygen meter comes with a lanyard, bring to the gym, office, or on vacation.
  • Sports Enthusiasts - Suitable for mountain climbers, skiers, bikers, aviators or anyone interested in measuring their SpO2 and pulse rate while on the move. You should only use the pulse ox before or after your exercise. Also, you must remain stationary while the pulse oximeter measure your pulse rate and SpO2 levels. This device is for sports and aviation use only.

HOW TO USE PULSE OXIMETER?
  • 1.Remove the battery cover, and insert the two AAA batteries following polarity marking indicates inside of the battery compartment, then reposition the cover.
  • 2.Slide your finger into the opening probe of the device, until the fingertip touches the built-in stop guide.For best results, make sure the finger is centered within the finger guide.
  • 3.Press the button to activate the oximeter from sleep mode, and then measurement interface will appear in 3 seconds.
  • 4.The measurement result will be read directly from the screen within 8 seconds.
  • 5.The oximeter will turn into sleep mode automatically within 10 seconds after the finger left the parameters :SpO2,
  • Oxyhemoglobin saturation (SpO2)
  • Measurement range: 36-99%
  • Analytic: 1%
  • Accuracy: between 70% and 99% plus or minus 2%
  • Heart rate pulse repetition rate (PR)BPM
  • Measurement range :30 BPM - 250 BPM
  • Power: 1.5V (AAA size)
  • Alkaline battery x2 (not included in package)
  • Supply voltage: 2.6-3.6V
  • Working current : ≤30mA
Heart Rate: the number of beats per minute of the Heart.Same person, when quiet or sleep heart rate slows down, when exercise or emotional excitement speed up!Warnings:
  1. Please check the direction of the battery. the 2 batteries are in different direction, please do the +/-para right.
  2. The finger must be connected to a deep enough, or he can\'t take the measure
  3. Please don\'t shake your finger or move the body during measurement, or the data maybe unstable.
Accessories:1x Oximeter Device1xUser manual1xLanyard1xLanyardSpO2 PR PI Heart Rate Measuring Monitor


Buy Now

Related Items:

Teledyne Instruments Analyzer Vintage Unique Finger Pulse Meter EUC in Case  picture

Teledyne Instruments Analyzer Vintage Unique Finger Pulse Meter EUC in Case

$111.58



2Pcs Adult Finger Clip SpO2 Probe Pulse Oximeters Fit For CONTEC CMS6000 3M 5Pin picture

2Pcs Adult Finger Clip SpO2 Probe Pulse Oximeters Fit For CONTEC CMS6000 3M 5Pin

$45.00



Adult Finger Clip SpO2 Probe Pulse Oximeters  Fit for CONTEC CMS6000/CMS7000 picture

Adult Finger Clip SpO2 Probe Pulse Oximeters Fit for CONTEC CMS6000/CMS7000

$26.00



Powered by WordPress. Designed by WooThemes