Science a GoGo's Home Page
Hello Everyone,

Steorn has posted a really cool video to their Youtube channel. In this video they do an experiment showing their motor does not experience any back EMF. They show scope traces which show that under load the current/voltage of their system does not increase. Also, as their system speeds up the current/voltage does not decrease.

This is very significant because it means the system does not experience back EMF.

Introduction to an Orbo Electromagnetic Interaction - Part 1

http://www.youtube.com/watch?v=S5nae_I_Mus

What's really cool is that there are folks on overunity.com that are replicating their motor. Also, Jean Naudin has replicated it!

It seems like Steorn's Orbo technology could be the world's first true OU technology.
Steorn's demo is starting back up on Tuesday. Anyone going to watch? Steorn will have live streaming video on their website.
These experiments from Steorn keep coming and coming.

Here is the latest video.

Steorn's Orbo Electromagnetic Interaction COP is greater than 1. Part 1 of 5

http://www.youtube.com/watch?v=bzcZDr1AcEU

Any thoughts about their claim of an inductance gain?
We need to see Steorn Orbo running on capacitor, instead of AA battery

From http://en.wikipedia.org/wiki/Steorn

"Steorn challenged the scientific community to investigate their claim[4] and, in December 2006, said that it had chosen a jury of scientists to do so.[5] In June 2009 the jury gave its unanimous verdict that Steorn had not demonstrated the production of energy.[6][7]"

Also check out this.
Originally Posted By: TheFallibleFiend

From http://en.wikipedia.org/wiki/Steorn

"Steorn challenged the scientific community to investigate their claim[4] and, in December 2006, said that it had chosen a jury of scientists to do so.[5] In June 2009 the jury gave its unanimous verdict that Steorn had not demonstrated the production of energy.[6][7]"

Also check out this.


[Quote=Mike Kremer]

The FallibleFiend is exactly right...Storn did not, nor will they ever demonstrate the production of (free energy)
I am surprised that they are still around I expect they are still using up the money gullible investors gave them
back in 2006.
Kate...our Scienceagogo administrator, started a long series of threads back then here:-

http://www.scienceagogo.com/forum/ubbthreads.php?ubb=showthreaded&Number=8851#Post8851

(in 20-08-2006)
They have changed their tune now...talking about back EMF instead.
Well of course there is no back EMF in the unit they are showing . Because it is not doing any work. All they have is a wheel being given a tiny magnetic (electrical pulse) push, as its magnets pass by.
Analogy- same as a child pushes a Swing. So its just a free tunning wheel, that is doing no work...can be slowed by a finger... and has no separate driving/retarding coil to measure any back EMF for work done.
Its just a free running wheel, and could just as well be spun round by a blast of air, for what its worth.
Steorn has proven their device is overunity!

Steorn Orbo - Proving Overunity 1/2

http://www.youtube.com/watch?v=T4Q3Klq5dxM

Steorn Orbo - Proving Overunity 2/2

http://www.youtube.com/watch?v=p7i7P63IByY

In the above links it's pretty clear to me they have proven their device does not experience CEMF!
its pretty easy to figure out if this thing produces any free energy.

will it spin the rotor longer than a normal electric motor will that is hooked up to a battery and at the same rpm?

if it will then it is producing energy to rotate the rotor?

you could set up two units one with the steorn tech and one without.

if the batteries both run out of electricity at apx the same time then theres nothing to it.

of course this type of conclusion would be much cheaper and less flashy than all the fancy measuring equipment.

Findsrud's steel ball rolls along a track for decades and nobody seems to be capable of admitting that free energy is being produced by the machine on the steel ball.

but how much energy would normaly be required to push that sleel ball around the track for decades?

howard johnsons magnet motor 1980's









For me this explanation is a bit technical, but you can read my intepretation of it bellow. Well, scientists are saying: experiment always goes first, doesn't it? Well, in praxis they respect it, if and only if it doesn't violate their own private theories.. Anyway, there you can find three independent videos of Cole-Bedini electromotor, running without external energy input - is it enough for unbelievers...?

1, 2, 3 (backup: 1, 2, 3, 4, 5)

Does this stuff violate thermodynamics? Not at all, in fact! When you put tiny, microscopic black hole into Earth from LHC collider, it will swallow it gradually while releasing a huge amount of energy spontaneously... - well, just not from "nothing", but matter of Earth. It's just the conversion of matter into energy, what is occurring here, and nothing very strange is about it. We can compare this principle to famous "drinking bird" toy, which works into account of evaporation of matter into its environment, too.

AWT compares matterial objects to huge clusters of tiny mercury droplets, which are separated against mutual coalescing by their surface tension forces. When we merge two droplets together, a huge amount of energy will be released and this process is even completely spontaneous! The nuclear fusion is one step forward in this process. Unfortunately (or fortunately for us), the Universe inflation has separated particles of matter in the very beginning of Universe formation and now the speed of particle merging is incredibly slow at room temperature, because of immense surface tension of incredibly tiny and dense particle droplets.

Does some way exist, how to accelerate it? Well, if we immerse mercury droplets into some dense environment, which decreases their surface tension relatively - then the coalescing of droplets would occur a way faster like during breaking of oil emulsion in mayonnaise by adding of spirit. The collider experiments are just trying to do the same, but much more vigorous - and dangerous - way.

One of the ways, how to make vacuum more dense is simply shaking it by external electromagnetic field. Vacuum foam is behaving like soap foam: under shaking it get thicker - the Java applet linked illustrates it by simple computer simulation. When we propagate electromagnetic waves through vacuum, it gets more dense temporarily and it accelerates the decay of matter into energy. This is the principle, in which AWT explains the function of "free energy" motors. Well - at least conceptually.
© Science a GoGo's Discussion Forums